Trenchless pipe repairing at Plumbing is becoming an increasingly popular option for fixing pipes in many homes. It is also known as trenchless because the whole procedure is carried out underground. As with the more modern alternative of replacing the foundations of a home with concrete, trenchless repair does not involve the need to excavate the home.
Trenchless pipe repairs can be expensive, however, because the excavation and pumping of the new pipes must be done from above ground. This can increase the total expense of the repair project by several thousand dollars. The installation method used to carry out this repair is also known as ‘wet trenching’ method. In wet trenching, large holes are dug and then filled in using cement.
One of the major factors that determine how much it costs to carry out this work is the amount of water that needs to be moved. For instance, if the pipe is in the basement of the home, then a large hole will need to be dug to allow for the pumping of water from the sewer to carry away water from the wall. If the pipe is in the yard of the home, then a smaller hole will have to be dug so that water can flow from the yard to the home. Both these instances are different from each other. In a wet-to-dry case, the larger the hole, the smaller the size of the pipe that is needed to carry out the repair.
As previously mentioned, the size of the pipe also plays a major role. There is always a minimum diameter of at least one foot for every one hundred feet in length. You will see this measurement on all drainage pipes. When the pipe is being repaired, it is important that this measurement is kept intact so that there is no blockage in the pipes when the water is being pumped.
It is a good idea to do some research online so that you can find out the price of a certain contractor. Most contractors charge by the hour or day. You need to set your priorities based on the amount of time it takes to complete the repair. If the repair is going to take more than 24 hours, then it is probably not worth hiring a contractor. Although, you can find a contractor who charges less per hour and charges on a monthly basis.
A very important consideration is the cost of the labour that will be involved. It takes more labor to dig out the pipe than it does to put it back in place. Therefore, you should find out what type of labour will be used. If you have already checked the cost of having the problem repaired, then you can use this knowledge to your advantage. If you are short on cash but are ready to take on some extra work, then you can get some estimates that include labour costs.
Once you have a list of contractors, it is important to call them up and compare their rates. You will want to look at the total cost for the job and see that contractors charge the lowest. It is possible to save some money by getting a couple of quotes. Make sure to ask how long it would take for each contractor to finish the job, as some companies may require a longer time frame.
If you do decide to go ahead with one or two companies for the repair, try to get several quotes before making a decision. This way, you will know that you are not paying more than you need to for a repair.